[NEW Product] TDR-960 series (960W Ultra Slim Three Phase Input DIN Rail Power Supply) 출시

MEAN WELL introduced a brand new industrial power supply~TDR-960 series, the ultra slim and three
phase input DIN Rail type power units. Featuring with 340 to 550Vac three phase wide input range,
TDR-960 can only capture two phases out of the three but still be operated by derating power during
the phase failure status. The slim design of 110mm in width helps save the precious space on the rail and
also makes it 40.2% smaller in size compare to its predecessor model DRT-960. Meanwhile, they have 2.5%~3% higher efficiency than corresponding old models, which response to the trend of green power
with energy saving concept.

With up-to-date high performance circuit design, TDR-960 series possess up to 94.5% of extremely high
efficiency and can be full load operated by free air convection cooling from -30°C to +50°C ambient
temperature (or up to +70℃ by suitable power derating). Built-in active PFC function, these high efficient
power units meet the harmonic current limitation per EN61000-3-2. In addition, with overload protection
function designed as constant current limiting and delay shutdown, TDR-960 series can be used in all kinds
of critical loading conditions, such as inductive or capacitive loads. Other standard functions include DC OK
relay contact alarm signal output, front panel LED indicator, front panel DC voltage adjustment , parallel
function, as well as protection for short-circuit, overload, over voltage, and over temperature. TDR-960
series comply with UL/ CB/ CE certificates and also meet the EMC requirements of heavy industrial
immunity level (EN61000-6-2). Suitable applications include industrial control system, semi-conductor
fabrication equipment, factory automation, electro-mechanical applications, and any installations of fan-less
and low noise requirements.

- Three phase 340~550VAC wide input range (Two phase operation possible)
- 110mm in width only
- 94.5% extremely high efficiency
- Built-in active PFC function
- Built-in parallel function/ current sharing up to 4 units
- Protection: Short circuit / Overload / Over voltage / Over temperature
- Cooling by free air convection
- Built-in constant current limiting circuit
- DC OK relay contact
- Installed on DIN rail TS-35 / 7.5 or TS-35/15
- UL508 (industrial control equipment) listed
- EN61000-6-2 heavy industrial immunity level
- Dimension(WxHxD): 110x 125.2x 150mm
- 3 years warranty